|
We carry valves to suit most any application. The most popular are the AV1B, plated brass lever style. They have tapered valve seats for long, no wear, life. All metal valves can be self threaded into PVC
pipe by first drilling an undersized hole, then thread valve into the plastic pipe by hand or chuck barb on straight valves and drive in with a screwgun style drill. Or, for ease of installation (AV1,
AV4, AV1B or AVW1TB) use a Tap to thread the holes first. For use on drip feed water systems use #AWV1TB, which is a plastic valve designed for water service to be leakproff. Good for use on water or air
systems. We also carry inexpensive fixed rate flow emitters for air or water use. Please call if you would like help designing your air or water distribution system. CALL for quantity discounts.
|
|
Item #
|
Image
|
Description
|
Price
|
Price @ qty
|
|
AWV1BB
|

|
Plastic Air / Water Valve 3/16 barb x 3/16 barb
|
$0.75
|
|
|
AWV1TB
|

|
Plastic Air / Water Valve 10-32 thread x 3/16” barb
|
$0.75
|
|
|
AV1B
|

|
Nickel Plated Brass Lever Air Valve 1/16 NPT x 3/16 barb
|
$1.10
|
50 @ $1.00
|
|
AV1
|

|
Nickel Plated Brass Lever Air Valve 1/8 NPT x 3/16 barb
|
$1.60
|
50 @ $1.50
|
|
AV4
|

|
Brass knurled knob style 90 degree angle 1/8 NPT thread x 3/16 barb, needle valve w/rubber seat & O-ring on stem
Can be used for drip systems
|
$1.60
|
50 @ $1.40
|
|
BBV1/4
|

|
Brass Ball Valve 1/4 NPT x 1/4” barb
|
$4.25
|
12 @ $3.75
|
|
AV13WT
|

|
Brass 3 way valve w/ hanging tab 3/16 x 3/16 x 3/16 barb
|
$2.25
|
|
|
AVGV2
|
|
2-way Gang Valve 2 adjustable nickel plated brass valves w/ pass through end tubing connector on plastic hanger bracket
|
$3.75
|
|
|
AVGV5
|

|
5 way Gang Valve 5 adjustable nickel plated brass valves w/ pass through end tubing connector on plastic
hanger bracket
|
$6.95
|
|
|
 Pre-built manifolds for fast installation of Central Air Systems. Includes hanger brackets, end plug and hose barb connector
Daisy chain multiple AVMP10 or AVMP20 manifolds with hose or PVC pipe
|
|
AVMP6
|

|
6 Outlet optimized Air Manifold w 6 AV1B Valves in 1/2” Plastic Pipe Manifold w/ 1/4” FNPT threaded ends and mounting clips specify
Hose Barb size connection when ordering. Can be connected in series for multiple manifold installations or singly with end plug. (use 3/8 barb - DAPMH8-15 pumps)
|
$12.50
|
|
|
AVMP12
|

|
12 Outlet optimized Air Manifold w/ 12 #AV1B Valves in 3/4” ID PVC Pipe w/ internal 1/2” NPT threaded connection on either end For use with Linear Piston or other
high output Central Air Pumps Includes hanging brackets, hose barb and threaded plug.
|
$21.75
|
|
|
AVMP20
|

|
20 Outlet optimized Air Manifold w/ 20 #AV1B Valves in 3/4” ID PVC Pipe 40” long, internal 1/2” NPT threaded connection on either end For use with Linear
Piston or other high output Air Pumps Includes hanging brackets, hose barb and threaded plug.
|
$29.95
|
|
|
Threading Taps: All of our taps are high grade HSS (High Speed Steel) for much longer life than cheap Carbon Steel taps. These HSS taps
can even be used on steel without damage. 1/8” NPT used for threading holes in PVC pipe to accept Air Valve #AV1. Makes installing a Centralized Air System a simple task. Drill 11/32” holes
for 1/8NPT or 1/4”hole for 1/16NPT, then run tap to 1/2 depth with Screw Gun at slow speed and reverse out of hole. 1/16NPT taps use 1/4” or 7/32 drill bit. 10-32 tap use 5/32 or #21 drill
bit.
|
|
TAP1032
|
|
10-32 HSS Tap (for #AWV1TB valves)
|
$3.50
|
|
|
TAP1/16NPT
|

|
1/16-27 NPT HSS Tap (for AV1B valves)
|
$6.95
|
|
|
TAP1/8NPT
|

|
1/8-27 NPT HSS Tap (for AV1 & AV4 valves)
|
$6.75
|
|
|
TAP1/4NPT
|
|
1/4-18 NPT HSS Tap (for BBV1/2 and PBV1/2x1/4NPT valves)
|
$9.95
|
|
|
Air or Water Emitters: Use for creating inexpensive drip water feed systems. Easily installed in flexible tubing by first drilling or puncturing a small hole, then press fitting emitter into hole. Use on low pressure water supplies only, (12 PSI). Emitters will provide a drip flow of water at a fixed rate of flow (actual output may be slightly more or less depending on input pressure), choose from either 1/2 gph or 2 gph flow rates. If using for air use #AWE.5 for small aquariums and #AWE2 for larger deep tanks. These emitters can also be installed in PVC pipe by using a short piece of airline tubing as a collar fitted over the barb section.
|
|
AWE.5
|

|
1/2 gallon per hour drip emitter
|
$0.25
|
100 @ $0.20
|
|
AWE2
|

|
2 gallon per hour drip emitterq
|
$0.25
|
100 @ $0.20
|
|
|
|
|
|
|