Water fill - Shutoff Systems

JWFAS-120V

Moveable tank clamp fill device:
Eliminate flooding from overfilling aquariums. automatically shuts off at your determined fill level. Accurately adjusts height of fill level to within 1/2” of your setting. Easily moves from tank to tank. Can mount on standard aquariums from 10 gallons through 220 or large tanks. (custom configurations possible). Accepts standard Garden hose connections.

$220.00

JWFDWST3FSI

Water Fill Device 3-interlock relay box w/LEDs:
Automatically controls filling and mixing of storage tanks. Use for RO/tap/buffer mixing. This device controls the filling of a tank to user determined levels fully adjustable for proper ratio of RO water to tap water or buffered water providing repeatable mixing levels. Interlock system prevents draining of tank if tank filling/mixing is in progress. For use in automatic water change set-ups such as drip overflow, purge type setups or drain and fill methods when a mixed water source is needed. Remains in last setting after power failure. Water fill is shut off during power failure and resumes cycle at same stage as before power interrupt. Requires 3 Float level swicthes #FLTSW18W-AH
Standard configuration is with 4 receptacles:

1. Timer receptacle for standard appliance timer (user supplied) to control duration of water changes from this stored mixed water.

2. Receptacle for water change pump. Uses the stored mixed water.

3. Receptacle for controlling partial fill of storage tank (example stored tap water or direct tap water source using solenoid valve). Water from water pumps (5 amp max).

4. Receptacle for controlling top off of storage tank (example stored tap water or direct tap water source using solenoid valve). Water from water pumps (5 amp max).

$448.25